Upgrading my computer’s primary storage from a hard disk (HDD) to a solid state drive (SSD). Really young folks on here have no idea how amazing it was for computers to go from taking minutes to start up to taking seconds.
Buying my first cell phone, which was a Nokia smartphone, in 2003. Having email and useful applications in my pocket, including maps and web search.
I feel like the sheer jump in performance from throwing an SSD into an old system was akin to what people would have expected from the “download more ram” scam ads of the 00s.
TBF, before win95 there was definitely legit software that you could buy (not download) that would compress memory, amongst other tricks, to effectively give you more RAM.
himem.sys
QEMM was the shit!
I was thinking and nothing was to big a deal but you are right. ssd and before that optical mice were major upgrades relative to price (price being the factor when I finally bought them.)
I find that my M.2 SSD (with Win 11 IoT Enterprise LTSC) is weirdly slower at booting up than my SATA SSD (Win 10 Pro) was. I’m not sure why, since the hard drive itself should be faster. BIOS itself seems to be slower.
I also can’t currently get it to even start if I have a hard drive plugged into the power supply and any of the SATA slots on the motherboard. IDK why. It reads the hard drives when I have them plugged in to an external bay and connected with a USB cable. It’s super-frustrating. I’ll try a SATA SSD and see if I have the same problem. If so, then I guess I’m stuck using M.2 drives. :(
You may have an issue with the boot order in your bios. Might be worth looking into. Your bios may try to boot from every other device connected to it before it tries the M2 SSD.
There’s literally nothing else connected to it though; no USB drives, no other hard drives, etc. When I tried to plug in my old 2tb 7200rpm drives from my last computer, it wouldn’t even power on to boot up.
With encryption it still takes a bit, but I love the silence.
GPS was life-changing. (Yes, I am that old.) It used to be necessary to find printed maps of wherever you were going, which wasn’t always easy. Then you had to figure out a route. The hardest part was often the last bit of the trip, since you weren’t likely to have a detailed map of your destination city. An if you got lost, figuring out where you were was sometimes quite difficult.
People tend to think of it as mostly affecting longer trips, but finding new addresses in a city was at least as much of an issue. When I lived in the bay area I had a Thomas guide that was 3/4" of an inch thick, just for finding my way around town.
I worked as a delivery driver before GPS.
If you think looking at your phone while driving is dangerous, we were looking at a folding paper map.
I also had most streets in a major metropolitan area memorized.
But more times than I can count I navigated by the sun or the north star until I was back in an area I recognized.My first “GPS trip” was using Microsoft Streets and Trips 2007 on DVD-ROM with USB GPS adapter, with my WinXP laptop in the front seat powered by a 12v inverter from Radio Shack.
MapQuest ftw! Did so many car trips that way.
Got lost so many times that way.
Better pray sweat/drink condensation/ANY moisture doesn’t get on that map, otherwise you’re toast!
I got lost leaving prom because I’d only had my license less than a year and didn’t know major highways. The printed instructions were illegible at night without your cabin light on, and that was dangerous too!
GPS and navigation was a life changing thing for me as I am, how shall I put it, geographically challenged.
Give me the option of turning left or right and I will constantly choose wrong. I tested this with my family, who thought I was being dramatic and hyperbolic, and they witnessed my failures in all glory. Since then I am no longer allowed to ‘just wing it’ when we are on route…
Bidet attachment for a toilet. Absolute life changer.
Hell yeah bidet.
Ah, a person of culture. A most pristine brown eye.
It’s sad how there are people out there who look down on the bidet. It really is a game changer. I still use toilet paper, but the process is so much cleaner and easier.
When putting it in, an older family friend (male) asked me, “oh you got that for your lady friend?” No…I want to save money and have a cleaner experience as a male.
Wait you have to put it in?
A wrench and a screwdriver. That’s all you need
I have the “portable” kind where you can just put it under the toilet seat you have and it connects to your toilet’s water system that brings in water. It was about $30 off Amazon.
It is really straightforward, but my issue was that after I installed it, I had unknowingly unscrewed one of the components in the toilet and it was leaking and I needed some help to figure that out and get it fixed correctly. It was when I was screwing in the new T shaped pipe that it was unscrewing something in the toilet.
There are also the kind that can come built in a toilet, usually on the higher end toilets, or you can get one of the dedicated bowls that is like a secondary toilet seated next to your toilet too.
A countertop water boiler, I have one of the Zojirushi 4 liter units. It turns out I drink 3/4 of a gallon of tea or so per day. So not having to boil a kettle for every round is oddly luxurious.
I usually microwave a mug for 1.5 minutes, but this could also be nice
Are you from the US?
What?
I remember Technology Connections doing an episode on the Electric kettle. Its fascinating. Microwaving is still the fastest around the house, but I like being able to make more than one cup at a time.
And they are super efficient, and insulated. If you have the counter space it’s a good kitchen tool.
Bought a dishwasher.
Life changing improvement. Don’t be afraid to use the pots and pans setting for everything.
You don’t need fancy soap and remember to top up the rinse aid.
(Also every 6 months run a special cleaner through it)
And remember it has a filter you need to clean once in a while
Not all models have a filter to clean. But those that do… definitely remember to clean it. They can get nasty if you don’t.
Probably should run the clean cycle monthly.
Steam deck finally got me working through my steam backlog again.
Might have played everything before I die now
Is it as good as they say? I really want one
A good docking station plus KVM for a good work & home setup since the pandemic hit.
I can dock my work laptop when I work from home and have my two screens, ergonomic keyboard, mouse, webcam etc all attached in one go, then a single button on my desk to toggle to my gaming desktop and start playing without having to disconnect anything, reducing wear and tear on the connectors.
Which one did you get? I am currently looking for this for my home setup.
For the docking station I got a WD19TB from Dell provided by my employer, and for the KVM I managed to find this one that does 3xDP v1.4 to ensure it supports VRR (I’m only using two monitors, but it’s nice to have the extra capacity), has three USB ports (to plug the mouse, keyboard and webcam) and has an audio out + mic in so that my headset follows the computer I’m using.
I made sure to use good DP cables to make sure the capabilities of the KVM and my hardware are always met, and so far it’s been quite smooth.
iPhone 3G. I’ll never forget the day I put the internet in my pocket
I bought one but didn’t have a data plan. Jumping from WiFi to WiFi still felt like magic. It was a laptop that fit in my pants.
For me, it was a Quest 3. The first VR headset to cross my personal threshold. My main requirement was that when I wasn’t playing actual VR games, the headset was worth using as a virtual computer monitor from the comfort of my recliner. While Quest 3 doesn’t quite have enough pixels to truly display my 4k screen at a 1:1 ratio, it is close enough that with the perceived clarity boost from the micromovements of your head meaning the same set of pixels is never sampled twice in a row and the headset running at 120hz, my 60hz real life 4k screen looks exactly as clear in real life as on the headset.
I also have a supplemental completely fabricated virtual 4k 120hz screen in the headset that I use for any games that are easier to run and benefit more from framerate than perfect individual frame clarity. The screens are 20 feet away, but each take up 80 degrees of field of view, twice what is considered comfortable, but I have always preferred what I guess in that context can only be classified as “intimate?” distance from my screens. I only use one screen at a time, the other is stored just out of sight up above. I can still look at it comfortably, and there is a button to swap the monitor locations when I want to change which one is being primarily used.
I also have my real world surroundings in the headset. So the screens are just floating within reality. I can still engage with my family, and thanks to the clarity of the passthrough cameras, I can watch TV with them too. Clearly enough to read the closed captions. The TV screen is about 30-40 degrees of my field of view, and is thus only represented as about a 720p screen, but with that same “temporal antialiasing” the clarity is boosted up to about 1080p level.
So, with all that, I spend about 14 hours a day in my VR headset now. Wirelessly, with a magnetic battery swap every 2 hours. Sometimes standing up and playing real VR games, sometimes reclining in a super comfortable chair playing desktop games. With the bobovr system, or whichever option you prefer, the headset is comfortable to wear for an infinite amount of time. And when I visit my real computer monitor now, I just leave my sit/stand desk in stand mode and no longer have a computer chair.
It has basically replaced every other screen in my life, except my phone. Which is still a main sticking point of VR. They will concievably replace the phone too eventually, but there is alot of software and hardware infrastructure needed to get there. At least Quest 3 is finally a headset clear enough to use your phone without taking it off or peeking through gaps. But only just, a phone tends to take up about 20 degrees of your field of view when used comfortably, even holding it twice as close as that is only 720p(temporally upsampled to 1080p) so holding the phone closer is still only about half the resolution of your phone. Assuming you run your phone in 4k normally. It’s probably fine for people without a gaming phone that likely already only run it at 1080p, then they might have text large enough to resolve at a comfortable distance in VR. But anyway. It’s not too bad now, so hopefully next headset is enough to completely solve that too, while we wait for it to not even be necessary eventually.
I’m basically retired, built up a big enough money ball that my passive income from it slowly increases, so this is the rest of my life. Slowly getting better and better VR. And while it started at Oculus DK2 for me, all the headsets before Quest 3 were only fun toys that I played with alot. Steadily increasing in capability, but not crossing the threshold into permanent screen replacement. Quest 3 did it, it crossed over that line. While the size of screen I use to represent my 4k TV is only actually physically covered by about 1440p worth of pixels, the free temporal upsampling makes it as good as 4k(2160p).
Though it will take double the current resolution for people that want a 4k screen at 40 degrees of field of view, for now people that like that distance (most people) would have to make due with it looking 1080p. Which might be fine for most people, it is still the most widely used screen resolution.
Edit for plugs for anyone that wants to do this too:
Outside of the Quest 3 itself, I use the third party comfort and runtime mod “M3 pro” from BoBoVR(dumb name, quality company), and Virtual Desktop software to stream my computer screen and create the better supplemental virtual screen out of thin air. I also use Virtual desktop to play my PCVR games when not just running something natively on the headset. Having a good network setup is pretty important too, especially in my case where the aforementioned recliner is on a different floor of my house than my computer. I have a background in networking, so in my case I’m able to setup my router in such a way that I can comfortably stream VR while we have 50 other devices on the router. But for most people, either a second dedicated router or specific VR streamer is going to be a better route. My router was 600 dollars, these bespoke units can be as little as 100 dollars and give you almost the same experience. Plus they are pre-configured specifically for VR streaming. Otherwise there can be alot of configuration changes needed.
I apologize for my verbosity, I hate to leave any details out, even though someone could just ask if I forgot to cover something. I am, unsurprisingly, Autistic. Communicating clearly is a common problem for us. Never know what knowledge I have that isn’t common and needs to be conveyed. And I don’t change mental gears well, so I like to get everything out once, if possible, to reduce the likelihood of having to get back into this mental space again later.
Wow. Thanks for sharing.
Bidet. Not even the fancy ones. Like the cheap ones that are no more than $20-30. Every poop, I’ve got a squeaky clean butthole.
Almost never having to cram paper in between my buttcheeks is fucking heaven. No more shit smears!
Totally agree; I hate pooping without it. Though I did upgrade a while back from a $20-30 one to this: https://luxebidet.com/pages/neo-185-plus-highlights
I took the old one off to really clean it and that sold me on this new flip up one.
A small vacuum and mop Roomba clone. Having two dogs leaving fur everywhere made vacuuming every day a necessary chore but now I only need to empty out their base every day and they take care of keeping the floors clean. I don’t have them connected to my Wi-Fi though so hopefully that helps mitigate any hacking attempts.
The Scooba? I was thinking about getting one of those. How do you like it?
They stopped making Scooba a long time ago. Broke too much.
The vacuum’s a Matrix Shark and the mop’s a Narwal something or other. Aside from them getting stuck in corners or entangled in wires once a week they work great! A little wire management and careful furniture placement lowered the chance of that happening again. One dog pretty much ignores it and the other eyes it with suspicion and wouldn’t be in the same room it’s running in but otherwise I haven’t had any big issues yet.
Getting a second monitor for my work computer gave me a 30% boost in my productivity.
They should cover at least 30% of the cost! Haha
induction cooktop? I’d say dishwasher but that’s probably more plumbing and pumps than “technology”.
With all the other gadgets, I’m not so sure. I’ve had computers, laptops, phones for ages. Of course my first everything back in the 90s or 00s was a big thing. But since then it’s just the newest generation, a bit faster and with more extras, but noting substancially different.
Induction cooktop is a game changer. Water boils even faster than with gas, you have much more precise control over temperature, and you can still handle the metal cookware while it’s on the heat. Absolutely love it.
I have an induction cooktop as well and I do have one complaint about it. It uses capacitive touch to adjust the temperature instead of a knob so I spend far too long tapping it buttons to get the temperature set right whereas with a knob I could have just turned the knob.
Yeah, I agree. I don’t like touch buttons on devices like this either. Fortunately mine has temperature control knobs, but all the other buttons are capacitive. Still worth it imo, but definitely annoying.
Sure. I don’t know why they design most of them like that… I really can’t be bothered to tap nine times to turn it on. I went to quite some stores and decided on one with two capacitive slider fields. That’s perfectly fine. I just tap somewhere at that slider and it’ll be 1-9 (boost) depending on how far left or right I touch it. Or I swipe. Main thing being, it just takes one tap. Except if I use more than 2 pans, then I have to choose which plate the sliders apply to. Yeah and it’s still the same inconvenience as with every capacitive control field and you can’t place a box of pizzas or anything wet or metal on top of the controls or it’ll complain and start beeping. I learned to place things behind the controls, but guests regularly get scolded by the cooktop.
I’m… Skeptical. Mostly because I have a lot of cast iron and love it, and I’m not sure how well they’d work with induction burners. And also because I want to get a wok burner (yeah, the 100k+ BTU monstrosities) for doing stir-fry, and I’m not sure that the realistically affordable induction wok burners are going to manage that.
Cast iron is fine with induction.
cast iron is pretty much perfect for induction.
for the wok: try it. Technology Connections did a video about them recently.
Basically: They should be fine. But it really depends on your stir fry style.
The somewhat good ones should be capable to get the heat into the wok. Keep in mind that a giant about of heat is getting lost on those burners. Not everything will heat the wok
Yeah, cast iron should work well. I also like the usual stainless steel or non-stick pans. I mean these get hot and cold almost immediately and I have good control over temperature. A heavy cast iron thing is made to store the heat and not do that. Depends on what someone is trying to achieve.
And something that doesn’t work are things that aren’t flat at the bottom. You just can’t have a wok that is completely round and put that on a flat surface. And also thin metals don’t work. So maybe use another cooktop for that. We own a wok that has a flattened bottom. But I don’t really like cooking with that thing. Not sure if it’s me or the wok.
There exists special wok induction stoves that have an indent for the wok, with the coils around it
Yeah, I’ve looked at those, briefly. I’m not sure if they would fit my wok, which is very thin cast iron (yes, actually cast iron, not a spun carbon steel wok). Hence the reason I want to get a wok burner that I’d end up needing to use outdoors.
That’s crazy. I think I’m fine, though. I own enough spezialized kitchen equipment 😆
Constant Glucose Monitors compared to the archaic finger stick monitors was like getting a blow job after spending a lifetime hacking it with sandpaper.
A raspberry pi.
Installed Pihole on it and now get almost no ads on all devices at home.