I’m going to be running a Jellyfin server, and I don’t want to maintain it a lot, I just want it to work. Would using Docker be the easier way to maintain Jellyfin, or would using Podman be better? (I don’t want to deal with SELinux, firewalls, port forwarding, etc.)

  • Boomkop3@reddthat.comEnglish
    13·
    1 year ago

    They do effectively the same, but most software is build with docker in mind. podman should work but be prepared for some frustration using it.

    docker nor podman fix your firewall or port for you by the way

  • vojel@feddit.deEnglish
    6·
    1 year ago

    SELinux should not be an issue if you stick to common directories and use :Z flag after the mount path with docker, afaik podman uses the same mechanism. There’s even a tool for selinux container policies: https://github.com/containers/udica

    Regarding firewall stuff, disable it on your machine and you are fine. Port forwarding in containers is necessary to connect to services, now way around.

    Ah and read this: https://stopdisablingselinux.com/

    It has a reason why it exists.

    • farcaller@fstab.shEnglish
      1·
      1 year ago

      Regarding firewall stuff, disable it on your machine and you are fine.

      How do you know OP doesn’t have a bunch of unsecured services sticking out into their LAN ready to be a target for the next cryptolocking scam?

      Slightly sarcastic, but yeah, OP, do not just turn your firewall without understanding pros and cons of doing such. At the very least, see what your server exposes to the network (ss -tunlp will give you a good starting point), and see if there’s nothing unexpected in there that might be abused.

      • vojel@feddit.deEnglish
        1·
        1 year ago

        I don’t but lots of people stick anyways to a single network with some kind of crappy router and from OPs post I assumed that OP doesn’t really care about security, see SELinux

  • TechAdmin@lemmy.worldEnglish
    6·
    1 year ago

    The container method used should be whatever you are more familiar with or prefer. They both have their own quirks, pros, & cons.

    SELinux - If you don’t want to deal with SELinux then set it to permissive mode. If you want to keep in enforcing mode you need to create the appropriate policies, https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_selinux/configuring-selinux-for-applications-and-services-with-non-standard-configurations_using-selinux

    Firewall - If you don’t want it’s protection then look up instructions to stop & disable it on your distro.

    Port forwarding - From linux container side you either need to specify host networking or the ports you want to allow through, there is no avoiding that if it needs to be network accessible. If you want it internet accessible then you need to setup port forwarding on your router.

    Have you looked into something like yunohost? It may be the kind of thing you’re looking for.

  • breadsmasher@lemmy.worldEnglish
    4·
    1 year ago

    Like other commenter said, regardless of podman or docker you will need to handle port forwarding, and any firewall changes.

    Port forwarding through docker or podman is pretty similar, if not identical.

    I have heard good things about podman but I personally had some strange issues when moving from docker to podman, specifically transferring docker networks to the podman equivalent.

  • Decronym@lemmy.decronym.xyzBEnglish
    42·
    11 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    Plex Brand of media server package
    RPi Raspberry Pi brand of SBC
    SBC Single-Board Computer

    2 acronyms in this thread; the most compressed thread commented on today has 5 acronyms.

    [Thread #308 for this sub, first seen 28th Nov 2023, 07:55] [FAQ] [Full list] [Contact] [Source code]

  • ErwinLottemann@feddit.deEnglish
    2·
    1 year ago

    there is a famous quote i like to use for this kind of question: "in the end it doesn’t […] matter’. maintenance should be about the same (if you update manually, which is better in my opinion, because you don’t come home to something not working because of breaking changes in the software)

    • Auli@lemmy.caEnglish
      2·
      1 year ago

      Eh I update automatically at 2 Am. I have had so few issues that I don’t even think about it anymore.

  • GunnarGrop@lemmy.mlEnglish
    1·
    1 year ago

    I haven’t used Jellyfin with docker before, just with podman and as a pod in k3s. Both work great and are easy to maintain. If you’re more familiar with podman then docker, then I’d recommend using podman.

  • Swarfega@lemm.eeEnglish
    1·
    1 year ago

    I run Docker containers on a Pi 4 using the RPi OS. For the longest time I’ve been using Plex. I wanted to give Jellyfin a go though, so just created a new compose file and mounted my TV/Movies directories. Other than the first time setup of Jellyfin I don’t touch it now. Plex and Jellyfin run side by side. To update I just do a docker-compose pull every so often. Super simple.