cross-posted from: https://lemmy.nz/post/28693796

Check the comments of the original post for the stupidity.

For those of you without an electrical background, the diagram shows the protective earth connected directly to phase, with phase and neutral also joined.

Correctly wired, this would be a three pin plug, with the earth wire connected to the earth pin in the plug, with the other end connected to the metal casing of the appliance. This is a critical safety feature, which will cause the circuit protection to trip in the event a phase wire contacts the metal of whatever this is connected to.

If this was actually done, the most likely outcome is it would trip a circuit breaker, but if the neutral was broken, it would connect phase directly to the casing, and likely electrocute someone.

  • Lucy :3@feddit.org
    link
    fedilink
    arrow-up
    5
    ·
    12 days ago

    I’ve wired plugs with like 12 and a large part of our house with 14 or so. Ofc, with my dad and depending on the circumstances a qualified electrician checking, but no matter how wild it got, I never made a mistake

    How are there people needing help to simply wire a plug? The hardest part is to open that damn thing!

    • SketchySeaBeast@lemmy.ca
      link
      fedilink
      English
      arrow-up
      14
      ·
      12 days ago

      Ofc, with my dad and depending on the circumstances a qualified electrician checking, but no matter how wild it got, I never made a mistake

      This is you saying you got help wiring a plug.

      What if people don’t have their dad or a qualified electrician to check? They need help from somewhere. AI is a stupid place to look for it, but people need help doing things they never have before. Would you prefer they guess?

      • Lucy :3@feddit.org
        link
        fedilink
        arrow-up
        3
        ·
        12 days ago

        I never had a simple plug or socket checked after my first five or so. For larger networks, I just shared the plan I made in my head. And the qualified electrician was there once, for the HV lines, as legally required.

        Also, not guess, but know. It’s very easy, especially plugs and sockets. Switches I can see someone pulling up the manufacturers docs to check which contacts are interconnected.

        • SketchySeaBeast@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          12 days ago

          Yes, after your first five, but before that you needed help. If this is someone’s first what are they do to? How are they supposed to know without getting some sort of help?

          "It’s easy, just do like my dad showed me!* isn’t helpful if they don’t know your dad.

          • Lucy :3@feddit.org
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            12 days ago

            My dad did not help me. Plugging in three strands where they obviously belong is not something someone needs help with. Again, he checked the end result. As in, one glance at the result the first time and plugging the plug into the socket in the first few times, because at age 12 an electric shock is much more problematic than at age 36.

    • Ilovethebomb@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      7
      ·
      12 days ago

      Someone replied to me saying this picture of a plug is a dead circuit, because nothing is connected to anything, they genuinely don’t seem to understand what a plug is.

      They walk among us.